skip to main content
Reach Local Inflow
This category is dependent on selection of the Link to MODFLOW 2000 RIP ET method in the Groundwater Computation category; see Link to MODFLOW 2000 RIP ET.
* None
This is the default method. There are no slots associated with this method.
* One to One Exchange
Note:  RiverWare’s connection with MODFLOW is currently not functional. This method has been disabled and cannot be selected. An error will be posted at model load if this method was previously selected. Contact CADSWES for help.
A drain return flow for each segment specified in the Reach Local Inflow Map slot is gathered from MODFLOW and set in the Reach Local Inflow from MODFLOW slot. The Reach Local Inflow from MODFLOW slot on the subbasin is mapped to the specified Reach.Local Inflow MODFLOW Return slot.
Slots Specific to This Method
 Reach Local Inflow Map
Type: Table slot
Units: No units
Description: Maps a MODFLOW STR or SFR segment to a Reach object specified on the subbasin
Information: The segment number of each MODFLOW STR or SFR segment receiving a diversion inflow is input by the user and the corresponding Reach object needs to be set as the row title.
I/O: Input only
 
 
Segment
Reach1
17
Reach3
18
 Reach Local Inflow from MODFLOW
Type: Table Series slot
Units: Flow
Description: Each MODFLOW segment specified in the Reach Local Inflow Map slot contains a local inflow (return flow) transferred from MODFLOW to RiverWare. The column labels are automatically defined at the beginning of the run, MODFLOW initialization. The user unit configuration (cfs, ft3/day, and so on) selected on this slot must match with the units used in MODFLOW.
Information: Transferred to RiverWare from MODFLOW
I/O: Output only
Revised: 12/01/2020