Water Quality
Stream Gage Water Quality
On the Stream Gage, water quality constituents are transferred through the object. In this approach, there are no dispatch methods. Water quality constituent values are transferred via links. You should link the constituent slot to both the upstream and downstream slots.
Slots
Temperature Slots
Heat
Type: Series Slot
Units: Heat
Description: Heat associated with the gage
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Salinity Slots
Salt Concentration
Type: Series Slot
Units: Concentration
Description: Salt concentration associated with the flow at the gage
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Dissolved Oxygen Slots
Ammonia Mass
Type: Series Slot
Units: Mass
Description: Ammonia mass associated with the flow at the gage
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Detritus Mass
Type: Series Slot
Units: Mass
Description: Detritus mass associated with the flow at the gage
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Dissolved Organics Mass
Type: Series Slot
Units: Mass
Description: Dissolved organics mass associated with the flow at the gage
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Dissolved Oxygen Mass
Type: Series Slot
Units: Mass
Description: Dissolved oxygen mass associated with the flow at the gage
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
User Methods
The following section describes the user-selectable methods for water quality modeling on the Stream Gage.
Revised: 11/11/2019